You can check if you are connected to a VPN server by going to Whats My IP and see if your IP is changed. After that the connection should be established. If it says “Disconnected” click on “Connect” button and wait for about 1 minute. You can check the connection going to “Status” tab and select “WAN” from there. This will reboot your router.Īfter the reboot VPN is set up. Scroll down and click on “Reboot router” button (21). Go to “VPN Passthrough” (17) and select “Enabled” next to “L2TP Passthrough” (18).Here, set “SPI Firewall” to “Disable” (16). Now go to the “Security” tab (14) and select “Firewall” (15).Make sure all other settings looks like in our screenshot. Select “DHCP Server” next to “DHCP Type” (11). Important, if this is the second router then you must set a different Local IP address then your main router. In the “Network setup” enter the IP address for the DD-WRT access point (10). In the “Optional Settings” zone change MTU to “Manual” (7) and type the value 1460 (8) in the field and set “STP” (9) as “Disabled”. Changing DNS in DD-WRT On the Setup tab under Network Address Server Settings (DHCP), look for Static DNS 1 and Static DNS 2. Make sure you use your VPN username and password and NOT the client area credentials. In the “Username” (4) and “Passwords” (5) fields enter your VPN username and password. You can find all the available servers in the package details in the Client area. In the “Gateway (PPTP server)” (3) type IP address or hostname of the TorGuard VPN server you want to connect to. Select L2TP (2) from the “Connection Type” drop down menu. Go to “Setup” tab and then select “Basic Setup” (1).Īlso you have to set your network connection to obtain IP address automatically if you connect to your router via Ethernet.Ĭonfigure your DD-WRT router to share your regular internet connection. For that you have to put in your browser the following address. We recommend you to use DD-WRT flashed router as the second one.Ĭonnect to your router. Important: L2TP can NOT be used concurrently with PPPoE or Static IP if you use DD-WRT flashed router as main router. We also recommend to check VPN on your PC/Mac to ensure that your network configuration and ISP allow L2TP/IPsec connections. Also please check if you can connect to Internet via Wi-Ffi from this router. In order to setup L2TP VPN on your DD-WRT router you have to flash your router with DD-WRT firmware and set router local IP address as 192.168.1.1. That happens because the connection does not use IPSec. Important! By setting up a L2TP VPN connection on a DD-WRT router your IP will be changed but your traffic will NOT be encrypted.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |